RAPID Maschinenbau GmbH

DGL 260 Double Mitre Saw - Extended cutting range and highest precision for Aluminium, PVC and Wood.

Technical data:

Precision, no-burr cutting of Aluminium, wooden and PVC profiles

• High quality of cutting and low-noise operation
• Extreme solid machine bed
• Rigid linear guide

Maximum drive power

• Direct drive

High precision

• Linear guide supported on both sides
• Bearing-mounted milling spindle
• Electronically balanced saw blade flange

High cutting quality

• Minimum distance between guide and saw blade

Suitable for:

• Window-, doors-, facades-,winter garden-, insect-profile
• PVC, combination PVC-Aluminium
• Aluminium
• Wood, combination Wood-Aluminium

GLX-250-RLA - Glazing bead saw with extended cutting range

Cutting to the principle "three A":

- Automatic length positioning
- Automatic saw stroke
- Automatic positioning of the glass simulation

For cutting of two PVC glazing beads in an angle of 45° at the same time.

System characteristics:

• Cutting of two glazing beads 80 mm each
• Saw blade diameter: 2 x Ø 250 mm and 2 x Ø 105 mm
• Saw stroke: hydro-pneumatically
• Saw movement from back to front
• Clamping system "Vario" with glass simulation
• Quick change of the contour blocks
• Powerfull  swarf extraction unit

GLX 250 RLA:

• Electronic Length Stop RLA
• Automatic length positioning
• Automatic saw stroke
• Automatic positioning of the glass simulation
• Graphic illustration of the profiles
• 15,6“ touch display, 500 GB HDD
• PC control, Windows 10
• Netzwork and USB interfaces
• Easy remove button for very short pieces
• The saw is controlled by the length stop control
• Measuring length 3000 mm

The Vario universal clamping system with a variable two-stage clamping unit with a steplessly adjustable glass simulation has been specially designed for the cutting of PVC glazing beads in the production of windows and doors. The glazing bead is pulled and clamped at the holding foot. The horizontal clamping plates of the glass simulation straightened up the glazing bead in the position like when glazing bead is "snapped-in". This method ensures a clean look of the window corners.

According to the profile width, the horizontal plates of the glass simulation can be step less adjusted via hand wheel with a position display. The glazing bead saw GLX 250 is equipped with a profile support roller as an anti-tipping device vertical and horizontal.

The profile depending parts are usually universal within a profile system since they are only adapted to the respective holding foot. The shape of the glazing bead does not play any role in the optimal clamping process using the Vario clamping system.

For up to 15° mitre cuts in aluminium and plastic sections.

The SGS-ML with it extremely high cutting precision is specifically designed for special applications. The fixed pivot point renders any angle correction unnecessary over the entire swivel range.

Product features:

• Swivel range from 15° left to 15° right
• Precision hard-chrome plated twin-shaft saw unit guides
• Sturdy basic design to ensure high precision of long mitre cuts

Standard equipment:

• Swaft cover.
• Lateral safety covers.
• Swivel attachment with lock positions.
• Rubber-coated vertical pneumatic clamp, vertically and laterally adjustable.
• Safe two-hand-control.
• Saw blade 500 mm.

Suitable for:

• PVC
• Aluminium
• Wood

Highly flexible and universally applicable for processing of PVC profiles with or without reinforcement. Proven RAPID machine building quality in connection with modern and sophisticated control technology.

Absolute accuracy of machining

• Extreme solid maschine bed, guides and spindles guarantee a long life cycle
• 360 degree technology
• The rotation device principle enables tool positioning independent for the angle
• Configuration up to 8 milling and drilling tools arbitrary
• Door-profile processing is possible with standard tools
• Automatically feeding system of the screwing unit

System features:

• In feed magazine for 10 PVC profiles
• External screwing station on a separate axis, inclusive gripper (option: MFC II)
• Milling and drilling module MFC with aggregates which are placed on a ring
• Off transport
• Out feed axis
• Scanner

Suitable for:

• PVC

Flexible system concepts for window manufacturing

With the components sub bench saw Optima Evolution and profile processing centre MFC Evolution we realise the production lines for our comprehensive programm of products in the range of PVC profile processing. Every part has the RAPID quality guarantee, from a solid basic frame, operator friendly controle to complete production lines - we build reliable, powerfull machines.

Quality

In order to offer our RAPID quality, we will follow special requests. We co-operate during and after planning and 
construction with you.This guarantees a solid, innovative and rational production solution.

PVC/Steel processing

This combination between Optima Evolution and MFC Evolution is built in good RAPID quality and performance. After cutting the frame and sash pieces could be reinforced and loaded to the second part for milling. With the MFC Evolution in that combination, we are able to prepare PVC and steel as well as to screw the profile with the reinforcement..

System features

• In feed magazine
• MFC Evolution machining module
• Buffer station
• Optima Evolution saw unit
• Out feed magazine

Suitable for:

• PVC