THE SIMPLICITY OF NEW VIEWS
The GUTMANN SC180+HW lifting and sliding series is sure to impress, with its simple handling, competitive performance and ease of use. In keeping with demands for high thermal insulation, SC180+HW allows a UD value of ≤ 1.0 W/m²K when combined with triple glazing. This impressive system uses winglet insulators to provide the optimum thermal separation – with additional insulation strips in the sash. A glazing rebate insulation layer and a 9 mm-thick outer glass composition sealant improve the frame’s insulation (high thermal insulation). The all-round seals provide protection against draughts, dust, water and heat loss.
At the same time, GUTMANN has followed modern architecture’s demand for large areas of glass, lending rooms a pleasant transparency thanks to the high incidence of light. On top of this, the lifting and sliding doors can be opened and closed with almost no sound at all. During frame production, the pieces can be cut with a bevel or straight, edge-to-edge. Symmetrical profiles for identical accessories for the inside and outside shells embody the ease of installation offered by GUTMANN lifting and sliding doors.
The high degree of pre-fabrication in our workshop reduces the installation workload to a minimum – only the top running rail needs to be mounted on-site when hanging the sashes. The profile sections for all the sash, frame, cover and KS profiles make the handling process efficient – no extra notches or additional work necessary. If required, all the clip profiles can be mechanically secured. Subsequent fine tuning at all the locking points is child’s play with the GUTMANN SC180+HW lifting and sliding system. The glazing system is based on the GUTMANN S70+/S80+ generation of windows.
- Installation depths: 180 mm frame, sash 80 mm
- Frame bevelled or cut end-to-end
- Max. sash size 3,300 x 3,000 mm (B x H) at sash weight of up to 400 kg
- Maximum glass thickness 60 mm
- Sash facing width 100 mm
- Opening design A, design A with fixed glazing in frame, design C, design C with fixed glazing in frame
- Break-in protection: Opening designs A; D; C; F RC2-approved